 |  |
[ Home > RV Polishers,
Buffers & Pads > Dual-Action & Orbital Polishers,
Pads & Accessories > New, 6.5 inch, CCS Technology, Foam Pad Kits ]
 New, 6.5 inch, CCS Technology, Foam Pad Kits
New, 6.5 inch, CCS Technology, Professional Pad Kits
We have assembled three pad kits for
use with the Porter Cable 7424 Polisher. The first kit is a basic kit for
maintaining a newer vehicle. The middle kit adds a compounding pad for restoring
gloss on older vehicles with oxidation (dull paint) and the last is a complete
kit that would allow you to perform virtually every detailing task possible with
the 7424 Polisher.
The foam pads in these kits require
that your Porter Cable 7424 polisher be fitted with a 6"
Hook and Loop Backing Plate. This backing plate may or may not have come with
your machine.
If you are purchasing or have
already purchased our 7424
Ultimate Detailing Machine, select a kit without a Backing Plate because we supply
this plate with our Ultimate Detailing Machine.
|
|
If you already own a Porter
Cable 7424 Polisher and your machine does not have a Hook and Loop
Backing Plate, select one of our specially priced kits that include a 6 inch
Flexible Backing Plate.
This plate is threaded
to fit the Porter Cable 7424 polisher but requires a Porter Cable Flat
Wrench to remove the stock pad and attach the new backing plate. This Flat
Wrench comes with all Porter Cable 7424 Polishers.
If you lost your
wrench you can order a replacement below. |
|
The pads in these kits are the
latest in Closed Cell Structure (CCS) foam technology.
What is CCS Technology?
The newer, harder,
scratch-resistant clear coats require longer polishing times to remove swirls,
spots and defects. The longer you polish with conventional foam pads, the less
effective they become because polish migrates below the working surface of the
pad. The pad "dries out."
|
|
| CCS Technology solves this problem using
strategic patterns of partially closed foam cells. These cells slow the rate of
polish absorption, gradually releasing polish as needed by the operator. CCS
Pockets reduce surface tension, prevent pad skipping and allow the operator to
run the pad flat on the working surface. |
|
|
CCS Pads feature two, additional, design innovations. First, they continue
to incorporate the latest, Constant Pressure™ technology.
Constant pressure may not be good for people but it's great for polishing pads
where you want a uniform and constant pressure on the surface being polished.
Professionals have learned through experience to keep their machines parallel to
the surface being polished. Tilting the machine in any direction can
result in an uneven and excessive pressure being transferred to the painted
surface. |
|
|
Blue "Constant
Pressure" foam backing
absorbs unwanted polishing motions. |
This new, patented, Constant Pressure technology uses a layer of
engineered, instant rebound foam between the pad and the backing plate to absorb
off-axis movements while keeping the pressure of the pad on the surface
constant. |
|
The other patented, innovation
incorporated in CCS Pads are a curved outer edge. The curvature on the outer
edge of the pad allows easy transitions over seams and inclines.
These pads do not have a
traditional "polish pocket" because the CCS Cells regulate polish
release, reduce splatter and eliminate paint "squiggles."
Whether you're a novice or a
seasoned professional, these pads will yield consistently excellent results.
|
|
|
Curved outer edge
allows easy
transition over seams. |
|
|
We
offer three different pad kits. Each kit is
available with and without a 6 inch Flexible Backing Plate.
Our CCS65PGF-KIT
is designed for newer vehicles with paint in "like new" condition or
with very minor swirls. This kit contains the proper pads for light Polishing,
Glazing and Finishing
with your favorite polish, glaze and liquid wax or paint sealant. It will allow you to create a
sizzling shine in a fraction of the time it would take by hand. We include a set
of instructions that anyone can follow to achieve professional-like results.
Our CCS65PGF-KIT
contains:
- Two 6-1/2 inch CCS, White Polishing Pads. Use these pads with a polish (like BLACKFIRE
Gloss Enhancing Polish, Menzerna
Final Polish II) to maximize surface gloss and prepare the
paint for the final wax or sealant. Polishing pads will "cake"
with residues during polishing making them ineffective. It typically
requires two pads to polish the average size car.
- One 6-1/2 inch CCS, Black Glazing/Finessing Pad. Use this pad to apply a glaze (3M
Imperial Hand Glaze, Meguiar's
No. 7 Show Car Glaze) to enhance the paint's wetness and
vibrancy while hiding minor swirls and defects.
One 6-1/2 inch CCS, Gold
Finishing Pad. Use this pad to apply the final liquid
wax or paint sealant (BLACKFIRE
Wet Diamond)
- 16 oz. spray, Foam Pad
Lubricant & Residue Remover
|
|
- Pkg/3 Snappy Clean Pad
Cleaning Packets
- Three Microfiber
Buffing Cloths. Use these to remove polish, glaze and wax
residues.
- Instructions.
|
|
|
Select this
CCS65PGF-KIT
for
polishing, glazing & finishing. |
Our CCS65CPF-KIT
is designed for older vehicles with paint that is slightly dull and/or
with deeper swirls, spots and defects. This kit contains the proper pads
for Compounding to remove swirls and
defects, final Polishing to restore
surface gloss and Finishing with your
favorite wax or sealant. Again, we include instructions that anyone can
follow to achieve professional-like results in a fraction of the time it
would take by hand. |
Our CCS65CPF-KIT
contains:
- Two 6-1/2 inch CCS, Orange Power Pads. Use these with a compound (like Menzerna
Intensive Polish) to remove swirls, minor scratches and paint defects.
Compounding pads will "cake" with residues
during compounding making them ineffective. It typically requires two pads to
compound the average size car.
- Two 6-1/2 inch CCS, White Polishing Pads. Use these pads with a polish (like BLACKFIRE
Gloss Enhancing Polish, Menzerna
Final Polish II) to maximize surface gloss and prepare the paint for the
final wax or sealant. Polishing pads will "cake" with residues
during polishing making them ineffective. It typically requires two pads to
polish the average size car.
- One 6-1/2 inch CCS Gold
Finishing Pad. Use this pad to apply the final liquid
wax or paint sealant (BLACKFIRE
Wet Diamond)
- 16 oz. spray, Foam Pad
Lubricant & Residue Remover
|
- Pkg/3 Snappy Clean Pad
Cleaning Packets
- Three Microfiber
Buffing Cloths. Use these to remove polish, glaze and wax
residues.
- Instructions.
|
|
|
Select this
CCS65CPF-KIT
for
compounding, polishing & finishing. |
Our last kit is a Deluxe
Pad Kit for the serious enthusiast. It contains a 6-1/2
inch, CCS Technology pad for virtually every detailing situation. In
addition, this kit contains a set of 4 inch, CCS Technology, Spot
Repair Pads for working on smaller swirls, spots and paint defects.
If you detail a number of different vehicles with different paint
conditions, this is the kit to select. You'll always have the
correct pad, regardless of the vehicle's age or paint condition.
Our CCS65DLX-KIT
contains:
- Two 6-1/2 inch, CCS,
Yellow Compounding Pads. Use these with a compound (like Menzerna
Intensive Polish) to remove deeper swirls, scratches,
oxidation and paint defects.
Compounding pads will "cake" with residues
during compounding making them ineffective. It typically requires two pads to
compound the average size car.
- Two 6-1/2 inch, CCS,
Orange Power Pads. Use these with a compound (like Menzerna
Intensive Polish) to remove light swirls, minor scratches and paint defects.
Again, it typically requires two pads to
compound the average size car.
- Two 6-1/2 inch, CCS,
Green, German Polishing Pads. Use these pads with a polish (like BLACKFIRE
Gloss Enhancing Polish) to polish the newer, harder, scratch
resistant clear coats or whenever extra cleaning power is needed. These are
also the best pads for applying one-step, polish/sealants like Klasse
All-In-One . Polishing pads will "cake" with residues
during polishing making them ineffective. It typically requires two pads to
polish the average size car.
- Two 6-1/2 inch, CCS,
White Polishing Pads. Use these pads with a polish (like BLACKFIRE
Gloss Enhancing Polish, Menzerna
Final Polish II) to maximize surface gloss and prepare the paint for the
final wax or sealant. Polishing pads will "cake" with residues
during polishing making them ineffective. It typically requires two pads to
polish the average size car.
- One 6-1/2 inch, CCS,
Black Glazing/Finessing Pad. Use this pad to apply a glaze ( 3M
Imperial Hand Glaze, Meguiar's
No. 7 Show Car Glaze) to enhance the paint's wetness and
vibrancy while hiding minor swirls and defects.
- One 6-1/2 inch, CCS Gold
Finishing Pad. Use this pad to apply the final liquid
wax or paint sealant (BLACKFIRE
Wet Diamond)
- One 4 inch, CCS,
Orange Power Pad Jr. Use this with a compound (like Menzerna
Intensive Polish) to remove light swirls, minor scratches and paint
defects in a specific area.
- One 4 inch, CCS,
White Spot Polishing Pad. Use this pad with a polish (like BLACKFIRE
Gloss Enhancing Polish, Menzerna
Final Polish II) to maximize surface gloss or remove light
swirls or spider webbing.
- One 4 inch, CCS, Gold
Finishing Pad. Use this pad to apply the final liquid
wax or paint sealant after spot polishing (BLACKFIRE
Wet Diamond)
- One, 3.5 inch, Flexible
Backing Plate. This fits the Porter Cable 7424 polisher allowing
you to use the 4 inch, Spot Repair Pads.
- 16 oz. spray, Foam Pad
Lubricant & Residue Remover
|
- Pkg/3 Snappy Clean Pad
Cleaning Packets
- Three Microfiber
Buffing Cloths. Use these to remove polish, glaze and wax
residues.
- Instructions.
|
|
|
Select this
CCS65DLX-KIT
for
covering every detailing situation. |
|
|
Proper Care:
Before you start working,
prepare a bucket of water with a packet of Snappy Clean Pad Cleaning Powder. As
pads become dirty, place them in the bucket to soak. Do not allow polish and
sealant residues to dry in the pad. When you're done polishing and
waxing, rinse the pads thoroughly, hand squeeze out excess water and allow to air dry. Push pads against a flat surface to push out water. Do not wring dry.
Do not machine wash or dry 6-1/2 inch pads.
The Microfiber buffing cloths
should be machine washed by themselves in warm water using a mild laundry
detergent or Micro-Restore. Do not use bleach or fabric softeners. Machine dry
at air temperature (no heat) or allow to air dry.
|
|
|