 |  | 
 
Clean, level, protect and
shine standard and painted RV gel coat surfaces in one step!
Product review by Terry Freiberg
If your gel coat (fiberglass)
RV is new, like new or freshly
polished, Gel Coat Labs One-step, Gel Coat Micro-polish & Sealant
is all you need to create a deep, rich shine and retard oxidation for at least
six months. This product performs every function necessary to keep your RV's
standard or painted gel coat healthy, vibrant and oxidation free. First, it uses refined oils and
special cleaning agents to remove micro-debris, and road grime in
the gel coat's pores. Think of this as using a body scrub on your skin before
applying a sun tan lotion. Cleaning the pores in the gel coat greatly retards
internal gel oxidation and will add years to the life of the gel coat.
Micro-fine polishing agents then burnish the finish smooth as glass. These are
not coarse abrasives. This product is not designed to restore dull gel coats.
This process of microscopically leveling the gel coat reduces wind drag which
reduces fuel costs.
|
Micro polishing also maximizes light
reflection (shine) by creating a more mirror-like finish. We routinely receive
comments like "awesome shine" and "I didn't know this level of
shine was achievable on gel coats". It's a shine that turns heads!
Lastly, modern polymers seal
the finish with an extremely tough, weather and UV resistant barrier. This barrier
protects the gel coat against industrial fallout, salt
air, acid rain and UV induced slow fade. This protection will last up to 6 months
even in high heat environments.
Gel Coat Labs
One-step, Gel Coat Micro-polish & Sealant is the most advanced sealant
available for preserving and enhancing standard and painted gel coat finishes. It contains no butyl, oxalic acids or coarse abrasives. It does contain
nearly five times the "solids" or active ingredients of other
sealants.
One 16 oz. bottle
is more than enough to seal and shine a 28 ft. RV.
|
|
Application Instructions:
Gel Coat Labs Micro-polish & Sealant can be applied and buffed in direct sunlight.
On small RV's
and personal watercraft, apply by hand with a Microfiber Applicator Pad. For
best results on larger RV's, apply with a dual-action polisher
(Porter Cable 7424) using a
7.5 Inch, CCS Technology, Orange Power Pad.
Set the Porter Cable 7424's speed control between 4
and 5.
|
|
|
|
|
|
Set Porter Cable 7424
speed control between 4 and 5. |
Attach a CCS
Technology, Orange
Power Pad to machine using a 6 inch
Flexible, Hook-and-Loop Backing Plate. |
|
|
|
|
Mist pad with Pad Lubricant.
|
Apply two lines of
sealant to pad. Place
pad on boat and turn machine on. |
 |
|
|
Move polisher in an
up-and-down,
back-and-forth motion over a
3 sq. ft. area until haze forms.
|
Buff off haze to
reveal a
brilliant shine. |
|
Apply two lines of sealant on the pad's surface. Mist pad with Pad
Lubricant (optional). Place
pad on the gel coat and turn the machine on.
Move polisher in an up and down,
back and forth motion over a 3 square foot area until a haze starts
to form. Buff off haze by hand with a Microfiber cloth. Continue in sections
until the entire RV is protected.
Available in a 16 fl. oz.
bottle and a 64 oz. refill. |
|
|