 |  | 
 
Remove heavy chalk, scratches,
spots and swirls in standard and painted RV gel coats.
This is the big brother to Gel Coat
Fine Cut Polish. Gel Coat Labs Gel Coat Heavy Cut Compound was designed to
remove heavy oxidation, deeper scratches and severe chalk on painted and
standard gel coat surfaces. Like its little brother, it was designed from the ground up
specifically for the unique characteristics
of gel coats.
We always recommend trying
Gel Coat Fine Cut Polish first. Most light to medium chalky finishes
can be restored with Fine Cut Polish. Gel Coat Heavy Cut Compound can be used as
a spot-repair compound to remove specific, deeper scratches or as a whole
surface compound to remove severe oxidation and chalk.
| Gel Coat
Heavy Cut Compound contains both a mechanical abrasive and a cutting
solvent. Avoid contact with rubber and plastic moldings.
For best results, apply
with a high speed, circular machine polisher using a gel coat, wool
compounding pad. After compounding, follow with Bow to Stern Fine Cut
Polish to restore surface gloss.
|
 |
After polishing, seal the finish with
Gel Coat Labs One-step, Gel Coat Micro-polish & Sealant
or
All
Marine Surface Sealant.
|
|
Application Instructions:
Wipe or dab Gel Coat Heavy Cut
Compound over a 3 sq. ft. area using a Microfiber
applicator pad. Place a Gel Coat Wool Compounding Pad (maximum cut) on your circular machine
polisher (Our
Aggressor Wool Pad is an excellent match with this compound). Set speed
between 1200 and 1800 rpm. Start at a lower speed range. Place the
Gel Coat Compounding Pad on the surface and turn the machine on. Move the
machine over the surface in an up and down, back and forth motion using medium
pressure. Reduce pressure as product begins to haze. Buff off residues by hand using
a dry Microfiber Buffing Cloth. If chalk is not easily removed, increase machine speed.
|
|
|
