Click to enlargeAll Marine Surface Sealant

Seal, shine and protect standard and painted RV gel coats for six months or more.

    If your RV is new or freshly polished, Gel Coat Lab's All Marine Surface Sealant is all you need to create a deep, rich shine and retard oxidation for at least six months. This product seals the pores in the gel coat greatly retarding internal gel oxidation. Sustained use will add years to the life of your RV's gel coat.

    All Marine Surface Sealant is the most advanced sealant available for preserving and enhancing gel coat finishes. It contains no butyl oxalic acids or coarse abrasives. It does contain nearly five times the "solids" or active ingredients of other sealants. This sealant has been scientifically designed specifically for gel coats and has been refined over the years to incorporate breakthroughs in polymer engineering and advances in gel coat and LPU (linear poly-urethane i.e. Awlgrip) technology. These new polymers seal the finish with an extremely tough, water and UV resistant barrier. This barrier protects standard and painted gel coats against marine contamination, industrial fallout, salt air, acid rain and UV induced slow fade. This protection should last 6 months or more .

    All Marine Surface Sealant can be used on top of Gel Coat Labs One-step, Gel Coat Micro-polish & Sealant to deepen the shine and extend protection.

    One 16 oz. bottle is more than enough to seal and shine a 28 ft. RV.

Application Instructions:

    All Marine Surface Sealant can be applied and buffed in direct sunlight. On small RV's, apply by hand with a Microfiber or foam Applicator Pad. For best results on larger RV's, apply with a dual-action polisher (Porter Cable 7424) using a 7.5 Inch, CCS Technology, Red Finishing  Pad.

   Set the Porter Cable 7424's speed control between 4 and 5.


  


Attach a CCS Technology, Red
Finishing Pad to machine using a 6 inch
Flexible, Hook-and-Loop Backing Plate.

Apply two lines of sealant to pad. Place
pad on boat and turn machine on.



Move polisher in an up-and-down,
back-and-forth motion over a 
 3 sq. ft. area until haze forms.

Buff off haze to reveal a
brilliant shine.


  Apply two lines of sealant on the pad's surface. Place pad on the gel coat and turn the machine on. 

    Move polisher in an up and down, back and forth motion over a 3 square foot area until a haze starts to form. Buff off haze by hand with a Microfiber cloth. Continue in sections until the entire RV is protected.

   Available in a 16 fl. oz. bottle and a 64 oz refill.





Click to enlarge16 oz., All Marine Surface Sealant
FS-MSP16$24.99
Click to enlarge64 oz., All Marine Surface Sealant
FS-MSP64$69.99
Click to enlarge7.5 inch, CCS, Red, Cool Foam, Finishing Pad
CCSCPCF-75RPrice: $12.99Special: $10.99
Click to enlarge6 Inch Flexible Backing Plate for Dual Action Polishers

(For attaching foam and wool pads to polishers like the Porter Cable 7424)

FBP-6DA$18.99
Click to enlarge6 Inch Flexible Backing Plate for Circular Polishers

(For attaching foam and wool pads to circular machine polishers)

FBP-6C$19.99







Need assistance?  Speak with one of our car appearance experts at
800-628-7596 or send us an email.

Get detailing tips, new product information and shopping rewards via email
by joining our Proper Auto Care Club News Letter.

Copyright(c), 1999-2002, Classic Motoring Accessories -- All Rights Reserved