 |  | 
 
Two great applicators,
at your fingertips!
Our BLACKFIRE, Ultimate
Hand Applicator Pad is
two applicators in one. The thicker white side is an engineered, German,
pre-polymer foam, specifically designed for polishing while the thinner, gold,
side is a reticulated (exploded), super-soft, German finishing foam. Use the
white side to apply your favorite polish or one-step product and the gold side to
apply your favorite wax or sealant .
| The pre-polymer (non-exploded)
white polishing foam was designed to work with today's water-based polishes.
This applicator works great with Menzerna and BLACKFIRE products. The white foam
has a cell structure that keeps a lubricating film on the surface. It allows you
to polish quite aggressively by hand without fear of creating swirls or surface
dullness. Simply mist the white foam side with water or any quick detail spray,
apply polish (either to the applicator or to the surface being polished) and
work over the area until the polish starts to dry. This pad has significantly
more cutting power than a Microfiber applicator which means it does a better job
of burnishing or "leveling" the surface. In simple terms, it creates a
brighter shine by maximizing surface reflection. It also does a better job of
removing and/or visually reducing light swirls and spider webbing. |
 |
| Use the white polishing foam side to
apply a polish and the gold finishing foam to apply a wax or sealant |
|
The gold finishing side
incorporates a reticulated (exploded) foam with a 99% open cell structure. It
literally glides over the surface applying a thin, uniform coating of glaze, wax
or sealant without swirls or hazy patches. The open cell structure allows the
applicator to stay wetter longer, maximizing coverage. You'll use less product
to cover a given area.
I used the white foam side to
apply BLACKFIRE Gloss Enhancing Polish and immediately applied a coat of
BLACKFIRE Wet Diamond All Finish Paint Protection using the gold side without any streaking or cross contamination. Very impressive.
|
|
 |
 |
|
Use the white side for
polishing... and |
the gold side for
applying wax & sealant. |
|
Proper
Care: Wash after use with soapy water, rinse thoroughly, hand
wring out excess water and allow to air dry. Do not allow polish or wax residues
to dry in the pad.
Final
Note: The more I use this applicator the more I like it. I now
designate my Microfiber applicators for cleaning and applying leather and vinyl
dressings. I use this Ultimate Polish & Wax Applicator whenever I hand apply
a compound, polish, glaze, wax or sealant. Don't confuse this applicator with
simple PVA foam blocks. The Ultimate Applicator is in a class by itself.
Applicator size is 3-3/4 x 6 x
1-1/8 inches.
Package of one BLACKFIRE Ultimate
Hand Applicator Pad. |
|
|